Using the Lee Collet Neck Sizing Die

Using the Lee Collet Neck Sizing Die to size 308 Winchester brass. I show how to set up and use this die. This is the next step in reloading 308 Winchester rifle cartridges.

Share this:

Leave a Reply

Please Login to comment
newest oldest most voted
Notify of

Did real well bumping the shoulder .002″ and then using the collet die (set it up little different for consistency) would do the double sizing.

Made a whole bunch of sub-MOA ammo that way. Annealing helps too.

I would set the die so that full down gave me the sizing and pressure I wanted. This was not trying to guess how much force I am applying versus last time. Then turn and size again.