Un-Boxing a beautiful 2-cavity aluminum bullet mold and well made mold handles from NOE Bullet Molds. John's Hand LoadingJohn has been shooting since he was a kid and is now a middle aged man. He likes shooting rifles and handguns, reloading, bullet casting and the outdoors. He believes in God, freedom and a good sense […]
New NOE mold break in run
I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns. I had wanted a round nose bullet for 10mm plinking loads. Something that would feed simply and flawlessly in each of my 10mm handguns and carbines. This bullet mold seems to do the trick.
I haven't been able to do any bullet casting, reloading, or make any trips to the gun range in about 3 months. I finally had a chance to do all three, so I grabbed the mold for one of my favorite bullets, the Lyman 429421, which is Elmer Keith's famous bullet for the .44 Special and .44 Magnum.
Today, I show in this video the entire process from start to finish how I cast, powder coat, load, and shoot some 250gr coated cast lead hollow points in the 44 magnum. This is one of my "go to" loads for blasting milk jugs without much recoil. These loads are perfect for maximum explosion with minimal recoil--great for those milk jug duels with the buddies. Got questions? Feel free to leave me a comment below, and I will do my best to answer it!
In this video I show most of the steps from start to finish on how I make one of my favorite milk jug exploding 45-70 loads. All the details should be in the video, but if you have any questions, feel free to leave a comment here and I will respond as quickly as I […]
3 months ago I posted a video about "My New Mobile Bullet Casting Bench". Today I finish the upgrades. I added the NOE Lead Pot Mould Guide. I also added ventilation for my casting pot.
Beginning Casting Discussion on Equipment
How I melt Zinc wheel weights and how I cast them. This is 3 movies combined watch all of it I use a Lee aluminum mold
Georgia Shooting Connection Friday Night Live Stream 6/28/19
Hit it square
Casting .44 Keith bullet and powder coating
Testing A Potential Future NOE Sprue Plate Coating Option
Casting with the Lee mold 124 grain truncated cone big thanks to Kyle for the mold and Jamie Jh586 for the handles, Chicowize for the lead and all the help in general you all rock!!!
I have always used card tables or other temporary tables to do my bullet casting on. I have now upgraded to a dedicated bench, and this one comes with storage for all of my bullet molds and other casting gear.
How I do it. Pour yourself a cup of Joe and enjoy the show. Running a two and a six cavity mould.
Tried the New NOE HOLLOW POINT MOULD. Put in long pins for deeper point, changed to a shorter pin as wasn't coming out as I intended. Mould had been cleaned and smoked, went up and down with temp, no avail. Finally added a softer alloy which did the trick.
The morning today was spent out at the range sighting in and shooting different loading of the Svarog hydrant slug.
For me it's not about saving money. The moments spent with Friends here learning this art. So I can pass it along to other friends, family and love ones and enjoy shooting more often. That's why I cast.
In chapter one of this series we made some brass jackets out of discarded .22LR casings using the Blackmon jacket swaging die. In chapter two, we're going move on to the next step in the process of swaging bullets; making lead cores.
300 BLK Cast Bullet For Dummies (NOE 310-225-RN) Start to Finish!
Recently I've been thinking a lot about alternative solutions for quenching bullets. While water is of course the standard, the fact is that many heat-treating facilities employ a number of specialty liquids to rapidly cool metal. With that in mind I decided to try quenching some cast bullets in antifreeze and alcohol, and comparing them to a water-quenched control group.
308 casting and powder coating and sizing
We go through and demonstrate our quick and dirty method for powder coating, so easy even a liberal can do it! mannyCAOur channel’s goal is to educate, enlighten, and entertain people in the shooting, handloading, and hunting sports. We aim to preserve and pass along our knowledge while having fun in the hope of drawing […]