This video covers how I prepare new brass for long range precision rifles. The first step in my load development is starting with quality brass and getting it ready for its first loading. This brass is for the new barrel that we just put in our Ruger Precision Rifle chambered in 6.5 Creedmoor. I cover […]
Let’s keep the challenge going! mr.revolverguywww.dayattherange.com
Hello to The Reloaders Network! BigE here! I thought I would try something different in my 308 target rifle. It started as a Savage 11VT that was found to be a little unsafe with the original barrel (short throat with rifling at 0.307″ would pop primers on factory loads occasionally and was almost always a […]
We've finally got a good shooting AR-10 upper chambered in 308 Winchester, so now it's time to start testing. Today I'm trying out the Lapua Scenars in 155gr and 167gr varieties with Alliant Reloder 15. The 167gr has shot well in my early tests with the Krieger barrel but it's time to try some different charge weights.
In this video we discuss reloading the Savage 110 BA stealth in 338 Lapua Magnum. This testing was with Hornady 230 gr ELD-X with Alliant Reloder 26. In this step we will develop a velocity curve to see where we want to load next time as well as ensure we are not hitting pressure in our rifle.
Testing today is with the 105 Berger Hybrid Target in 6mm Creeedmoor. We are evaluating a load using my Ruger Precision Rifle. There is velocity and group data at 150 yards. We use Lapua Brass along with CCI 41 primers to see if these will work well in our Ruger Precision Rifle.
In this video we try the 110 gr Sierra Match King with Hogdgon Superformance to see what accuracy and velocities that we can achieve. We use CCI-41 primers and Lapua brass and test and show velocity and group data at 150 yards.
Testing today is with the Sierra Match King 110 gr HPBT in 6mm Creedmoor. We are evaluating a load using my Ruger Precision Rifle. There is velocity and group data at 150 yards. This high-BC 6mm bullet pushes the limits of the twist rate of our barrel. We use Lapua Brass along with CCI-41 primers to see if these magic bullets will stabilize in our 1:7.7 twist barrel.
The new Lyman 8 Station Turret press is an impressive piece of gear...
In this video we start our reloading process. We determine the Load Data and COAL for our first loads for out initial reloading and how it was picked. We discuss load data for the Berger 105, Sierra Match King 107 gr HPBT, 110 gr SMK HPBT, 115 gr DTAC for our Ruger Precision Rifle in 6mm Creedmoor. Powders Discussed are Reloder 16, Hodgdon H4350, Hodgdon Superformance, and IMR 4451.
Reloading 6.5 Creedmoor with Reloader 15 Out on the range today I will test two different loads — loaded with Reloader 15 putting it up against Hornady Factory ammunition. This started to just find a light load for the medium range distance 100 to 300 yards with Reloader 15 and lighter bullets but my buddy […]
This video shows the Berger 130 AR Hybrid OTM Tatical loaded with Reloder 16 in my Ruger Precision Rifle in 6.5 Creedmoor. There is velocity and group data at 150 yards. We use Lapua Brass along with Fed 205MAR primers.
Follow us as we field test this handload.
Part 2 of testing the 175gr Sierra Match King in our new JP SuperMatch .308 Win barrel using IMR 4064.