Today we are onsite with Utah Air Guns! Taco goes from 1 to 5 on the "net new" guns, and we go over some listener feedback.
To powder coat or not to powder coat... that is the question. And today we have some answers.
A Coyote(s) Story, A shovel, & A Hunting/Outdoor Expo
Taco gets a fake RMR and Jason gets a new flashlight!
Today I would like to make us all think about a few things that are important to me. In life, we don’t really get to “keep” anything. We are here for a while and then we are gone. If we don’t intentionally invest time and effort into passing along the things we know and believe […]
In this video I’m firing forming some Lake City Brass and performing initial ladder testing with Hornady 158 gr XTP’s and Speer 220 gr Hot-Cor’s. The 358 Yeti is a wildcat round designed by Mad Dog Weapons Systems. I built the rifle, and it’s my first AR build. Powder: Shooter’s World Blackout. Fresh Formed Lake […]
Today we talk about tyrants, correct some stuff, and talk about guns!
Counter modification for the Dillon 550b, 550c, 650, 750, …and probably other progressive presses from Hornady, Lee, etc. Hazzbro’s HideReloader, shooter, flintlock builder
Casting, Reloading, & Shooting 147gr 9mm Ammo
Annealeez 2.0 counter mod with Temilaq 650F temperature fluid use for Winchester head stamp 308W brass. Hazzbro’s HideReloader, shooter, flintlock builder
Getting together in Utah with a bunch of the reloaders!
A Cowboy From Chicago!?
Today, we talk about a few of our favorite knives.
Today, Jason and I (taco) go and do some rabbit hunting without any guns--instead we hunt with a hawk with Mark Housekeeper from Magholder.com
Welcome back, reloaders! Let’s get down too it. I was browsing through Brownells website the other day and decided to try out the famous Forster Micrometer Seating dies and do a review. I’ve heard a lot of hype around Micrometer dies in general and especially this one. If you follow any of […]
After looking at all of the powder tricklers on the market (except the Lyman Brass Smith that wasn't released yet) I settled on the RCBS Powder Trickler 2. This was because it was quality built, very sturdy, weighty, adjustable height, extendable tube and threaded tube.
Having some fun with a new Match Grade Machine Barrel!
Dear Reloader’s Network, Hello, and welcome to my first attempt at an article ever. My name is Norton’s Ammo Bench, and I thought that the best way to get me feet wet in this new arena was for me to introduce myself and give you an idea of what I’m about. My future posts will be […]
We finally get Stan back on the show as we discuss some news, what we did with guns, and some pew pew guns.
For all of you who need a little fart load for a squirrel... or maybe a mouse?
A hunting chat and then the audio from Taco's top 10 firearms gratitude list.
One of my older videos on a warm day in 2017. This little sixgun is one of my most used. The bullet is a Lee 45-230-TC cast from one of their 6 cavity moulds with a charge of Promo Powder, 4 grains by weight. This is a very simple video for your enjoyment on this a late fall day.
Shooting some of my ACME bullets that I reloaded.
In this video I would like to demonstrate the Lyman Case Trim Xpress™. Even extreme trimming opperations can be done very fast and easy. WiederladerTvhttps://wiederlader.tv/