One of my older videos on a warm day in 2017. This little sixgun is one of my most used. The bullet is a Lee 45-230-TC cast from one of their 6 cavity moulds with a charge of Promo Powder, 4 grains by weight. This is a very simple video for your enjoyment on this a late fall day.
Casting and shooting the Lee 358-140-SWC from start to finish. Thanks for Watching. KFWI enjoy all things outdoors and gun related. I am a life long hunter and staunch supporter of self defense and the right to keep and bear arms. I am a Concealed Carry Instructor in the state of Kentucky and enjoy helping […]
Just answering some questions I have gotten about this particular Ruger SP101.
Shooting the 357 Magnum Hollow Point (loaded to ~1100 fps), 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Taurus 66.
Shooting the 357 Magnum (loaded to just over 38 Special +P), Hollow Point, 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Taurus 66.
Seeing how far I can make consistent hits on a 10" steel target with my trusty the 2 1/4" Ruger SP101 and my hand loaded 158 grain Hornady XTP .38 Specials.
Shooting the 38 Special +P cast with a hollow point from the 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Ruger LCR.
Ruger GP100 model 1773. First shots with .38 Spl and .357 Magnum Jerry 19112A On A Budget
In this video we test our hunting load for 6.5 Creedmoor. The 135 gr Berger Classic Hunter with Alliant Reloder 26 are tested. We test to see if load works in our TC Compass as well as our well worn Ruger Precision Rifle.
New equipment and tools added to the channel for future content. Thanks to Smith & Edwards Co. West Jordan, Utah for their assistance in deciding on this pistol. Jerry 19112A On A Budget
Shooting the 357 Magnum Hollow Point (loaded to ~1100 fps), 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Taurus 66.
Shooting the 357 Magnum (loaded to just over 38 Special +P), Hollow Point, 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Taurus 66.
Ruger Predator .308 Winchester
Shooting the 38 Special +P cast with a hollow point from the 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Ruger LCR.
Happy Halloween..!! The 38 Special - let's go one better - also loaded was the 357 Magnum. And here's the range testing on a very windy day in Northern California.
Steel Challenge Range Practice The Reloader DudeRifle Pistol Shotgun Shooting. Reloading Topics. Reloading Product Reviews. You can see all of my social media links on my Author page.
For today’s video we try out some Norma Bondstrike 30-06! I hope you enjoy the video and thanks for watching!
There are many many cast bullet designs out there. Some really like us and our guns, and we really like them. This video features one of those for me. How about sharing some of your favorite loads, I call them “sweet spot loads” because they are safe, reliable, accurate and they really hit the spot..! […]
I put some Acme Bullets 230gr 45acp that I reloaded thru my Ruger SR1911.
I decided to see how far I could shoot the Ruger Mark 3 Hunter 22/45 and keep the shots on an 8" target.
Which 45 Colt will go further through the material? Which one will do the most damage using the Hornady 225 gr FTX, the 250 XTP, and the Frontier lead 45, all at 45 Colt pressure level? Leverguns 50-110 WCFMost of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, […]
In this video we see if we can improve our group sizes by adjusting the bullet seating depth in our Ruger Precision Rifle. The barrel has ~2500 rounds through it and the distance to the land has increased by more than .040".
Shooting the 38 Spl +P, solid nose (RNFP), 1:40 alloy with a BHN of 8.0 into Clear Ballistics Gel from my Ruger LCR.
I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns. I had wanted a round nose bullet for 10mm plinking loads. Something that would feed simply and flawlessly in each of my 10mm handguns and carbines. This bullet mold seems to do the trick.